Low Price Guarantee Low Price Guarantee
Fast, Free Shipping Fast, Free Shipping
Customer Service 5-Star Service
No Hassle Returns No Hassle Returns
By browsing, you consent to our use of Cookies.

How To Clean Dirt Bike Goggles

Chaparral Motorsports
May 1, 2021
Last Updated: December 8, 2022
If you have a premium pair of dirt bike goggles, then you want to make sure you keep them clean to preserve them as long as possible. Typically, you should clean your goggles after every ride, removing excess mud and gunk to ensure they are as pristine as the day you bought them. While many riders do not get in the habit of cleaning their goggles so frequently, you should at least do it occasionally to limit potential damage.Cleaning your goggles is relatively straightforward. Do not use any harsh chemicals, and follow this simple three-step process:
  1. Remove the lenses and soak: Place the lenses in a lukewarm water bath with a bit of hand soap. Let the lenses sit for a few minutes to soften up any mud or debris, reducing the risk of scratches when wiping them off, then carefully wipe them with a nonabrasive cloth.
  2. Soak and clean the foam padding: Use the same process as step one. Let the pads soak for a few minutes before attempting to scrub them clean.
  3. Let the parts dry: Hang the pads to dry and use a microfiber cloth to dry the lenses. You do not want to throw the goggles in the dryer. Muc-off offers a cloth that that can suit this purpose.

There are a few additional steps you can take to ensure that your dirt bike goggles are properly cleaned and well-maintained. Here are some additional recommendations:

  • Avoid using harsh chemicals: As mentioned in the instructions, it is important to avoid using harsh chemicals, as they can damage the lenses and foam padding of your goggles. Instead, use a gentle soap solution and a nonabrasive cloth to clean the lenses and foam padding.
  • Rinse thoroughly: After cleaning the lenses and foam padding, make sure to rinse them thoroughly with clean water to remove any soap residue. This will help to prevent irritation and ensure that your goggles are clean and ready to use.
  • Store your goggles properly: After cleaning and drying your goggles, make sure to store them properly to prevent damage. Avoid storing your goggles in direct sunlight or extreme temperatures, as this can cause the lenses to fade or the foam padding to deteriorate. Instead, store your goggles in a cool, dry place, and keep them in a protective case when not in use.
  • Replace worn or damaged parts: Over time, the foam padding and lenses of your goggles may become worn or damaged. If this happens, it is important to replace these parts to maintain the performance and safety of your goggles. Check the manufacturer's recommendations for how often to replace these parts, and replace them as needed to ensure that your goggles are in good working order.
Back to Top